Advertisements:




When Using Mouse Computer Beeps And Cursor Freezes


Its nothing to do with any program but like when im using my mouse i just get some beeps from the computer like 1beep, 2beeps, 1beep then my mouse will freeze and i either get movement back and its all ok or the cursor freezes but everything else is ok, i will give 2 examples

1. I was on the desktop, msn messenger was dl'ing and i just finished updating direct x. The folder with everything i extracted i highlighted and tried to move then i got those beeps and the cursor froze, but msn continued dl'ing and then completed! I reset and installed it, wasnt even corrupt or owt. 2. As i was filling out system specs in user cp now, i went to click on the privacy thing if i want others to see my specs and as i clicked i got the beeps but i got movement back, then a few mins later as i tried to scroll down same thing but im still going. Now as im writing this im running blend test on orthos and 50 mins so far. Also i have speedfan running. - Ram? Maybe a possiblity but surely orthos would have shown that by now?
- Cpu overheating? But idle im 25 degrees and right now under 100% load im 40 degrees
- Psu? Not enough power or something? But i aint got a powerhouse rig really. Any help is appreciated! And the beep happend again now! Also, i checked the manual if the beeps meant anything and nothing, but any beeps you get is when post, not in windows.


View Full Post With 10 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Monitor Goes Dark Then Returns, Mouse Cursor Freezes Afterwards

I believe it is a thermal problem with the video card, but i'm not sure. After the box has been on for 30-60 minutes (or so) the monitor goes dark for a second then returns. This happens a few times and if it really gets bad (more frequent) the dark periods get longer that the monitor goes into standby mode then returns with the mouse cursor frozen that i have to reboot to get it back. I know it's not the monitor, it's the video card not sending a signal to it and somehow also locking up the mouse (keyboard is ok). This happened after installing s/w for a hp s20 photo scanner, but i don't think that is the problem because on my other bootable drive (in the same box) the problem is there but not as bad. It might be making it worse, but i don't think it is that easy. I'm also not sure it is the card itself, though it is the card that is not sending the video signal to the monitor.

Posted On: June 21st, 2003, 11:19 AM . View Related Posts . . View 4 Replies .

Computer Beeps Then Freezes

My computer is acting weird. When i right click the desktop, the menu appears in very slow motion and transparent. Then after few seconds everything freezes i cannot move mouse cursor also and i get a long beep and then restart. What is the problem can some one explain ?

Posted On: 09-06-2009 . View Related Posts . . View 3 Replies .

Computer Beeps And Freezes

When i turn on the computer, i see the windows splash screen, and then i just get a black screen. I must do a cold boot and then i can go into safe mode. But in safe mode, certain functions cause the computer to freeze and beep. I went to system tools, disk cleanup and the computer froze and started beeping. I had to do a cold boot and then i got the black screen. I did another cold boot and then i got back to safe mode. I tried to launch a mcafee virus scan, but again, the computer froze and started beeping. I had to do a cold boot and then i got the black screen. I did another cold boot and then i got back to safe mode. I ran a hijack this log but i went to save as and tried to save it to a floppy. Again, the computer froze and started beeping. I had to do a cold boot and then i got the black screen. I did another cold boot and then i got back to safe mode. Does anyone know what causes the beeping? Could it be a virus? If so, how can i remove it since the computer freezes and beeps when i try to run my virus scan.

Posted On: 10-Nov-2006 . View Related Posts . . View 13 Replies .

Computer Beeps Once Then Freezes

I currently have a problem with one of my home pc's. The pc is running windows xp pro with all the latest updates. When i start the pc it starts fine with no problems, but after about 15 minutes the pc beeps once and then completely freezes, nothing moves, i am unable to turn off the keyboard cap lock lights, unable to move the mouse etc. Normally i would say that this is something to do with the motherboard because it is effecting the keyboard etc. However this has happened to one of my other pc's in the past, i formatted the drive and it was fine. I think that it maybe caused by a virus because i am unable to run any of my anti-virus tools. I have installed: superantispyware, malwarebytes, avg free and spybot. The only ones i can get to work is superantispyware when running in the alternative start mode. I have tried the following so far: booting in safe mode but the pc does eventually do the same thing and freezes. I have tried running mscopnfig and removing unwanted services and startup items but again this hasnt made any difference. I have checked the event logs and nothing is there. Please can anyone offer any help?

Posted On: 02-11-2010 . View Related Posts . . View 1 Replies .

Mouse Cursor Makes My Computer Freeze

My computer is almost brand new, and quite the powerhouse, but for some reason, using the mouse will make the computer freeze up no blue screen of death, no error messages, it just dies and dosen't respond to anything. I can't ctrl+alt+del at all, and even pinging this machine from another (business intranet) results in lost packets (100% loss everytime. )

The solutions i have tried are numerous. First i thought if i changed drivers, nothing. New mouse, went from a ps/2 mechanical mouse to a usb optical mouse, complete with new drivers, no change still. Irq settings, seem ok, but i didn't look too deeply into that. Dma channels, seem ok. So, if this was some simple issue like a bad ps/2 port, i can understand, but using the keyboard to navigate my whole machine is getting a little annoying. Any suggestions from anyone?


Posted On: July 1st, 2004, 07:40 AM . View Related Posts . . View 11 Replies .

Computer Freezes Mouse Still Moves

I just upgraded my friends laptops memory from 512 to 2 gb, now the computer freezes after about 30 seconds of booting up to windows but the mouse is still move-able. I tried 3 different sticks of ram still same problem. Any help?

Posted On: 03-27-2009, 10:35 PM . View Related Posts . . View 2 Replies .

Laptop Beeps Once Then Freezes If Lightly Tapped

Just wondering if anyone has come upon this problem before and has any solutions. I have a laptop that's a good 3 or 4 years old (maybe more) that still works great (other than the screen which flickers or fades if i don't position the hinge correctly). Occasionally, the vent/cooling fan gets clogged with dirt, causing it to shut off, so i've opened it up and cleaned it a few times to get it back to working order. Recently, my laptop freezes when (very) lightly tapped. It'll make one short beep then freeze.could this also be an overheating issue? Or is it simply time to replace it? Its a shame, since the laptop is still decent given its age, i'd hate to see it go to waste. Any advice is appreciated, thanks!

Posted On: 10-16-2009, 12:30 PM . View Related Posts . . View 3 Replies .

Mouse Cursor Skips

So i put a new one on the system and guess what? It skips. What's with that? Win 98se

Posted On: November 8th, 2002, 08:27 PM . View Related Posts . . View 4 Replies .

Huge Mouse Cursor

Anyone else have the issue with a 5850 where the mouse cursor blows up to an abnormally large size? Usually after running a 3d application. It's weird it only does it on 1 of my monitors (i use 2)

Any thoughts?


Posted On: 10-18-2009, 10:07 PM . View Related Posts . . View 9 Replies .

Mouse Cursor Scrolls Down On It's Own

Once in a while my mouse, ms intellimouse exporer 3. 0 mouse cursor will just scroll down on it's own one "click" it sucks for games where all of a sudden i am now using the wrong weapon! I just reformated my system and it's still doing this, any ideas?

Posted On: 10-14-2004, 05:25 PM . View Related Posts . . View 5 Replies .

Mouse Cursor Moves Automatically From Up To Down

Whenever i connect my pc to internet (dialup, gprs) my mouse pointer starts messing up with me. It automatically starts moving from up to down from left to right randomly. I think i should specify here that it only happens when i connect my pc to net. Whenever i try to click on some link it just slips down. I think there is no problem with the mouse or there is no hardware related problem, i have tried replacing the mouse but of no use. The only thing in my mind is a virus or some stupid trojan tryin to hijack my mouse pointer. Any body having any idea what's wrong?

Posted On: May 7th, 2005, 05:23 AM . View Related Posts . . View 1 Replies .

Mouse Pointer ( Cursor ) Not Responding

My friend is having a problem with his mouse not working. He is able to move the mouse cursor around but then it doesn't respond when clicking on an icon, taskbar, or anything. Can anyone help diagnose the problem we are are having?

He is running windows xp 32bit and his comp is really old (his mouse still uses the track ball and is not via usb port) and i think his pc has some other problems of it's own that could be related to this, but i don't know.


Posted On: 10-16-2009, 02:44 AM . View Related Posts . . View 7 Replies .

Mouse Cursor Click Triggering

For no obvious reason my laptop has developed a fault where if you move it slightly it triggers the mouse click and starts triggering actions (depending on where the cursor is pointing). Anybody experienced this before?

For example if you are sitting with it on your lap surfing the web then adjust your sitting position you end up navigating to different web pages - any thoughts?

It is a fujitsu siemens amillo laptop.


Posted On: November 11th 2007 . View Related Posts . . View 1 Replies .

Mouse Cursor Does Not Move And Stay Still On The Screen

I have a standard mouse ps/2, i try to move the mouse and the curser doesen't move on screen at all. All the curser does is stay still, what should i do.

Posted On: April 13th, 2005, 06:14 AM . View Related Posts . . View 3 Replies .

Mouse Cursor ( Pointer ) Veers Off The Screen

I am using a dell latitude laptop, wih an external wired mouse. This laptop also has something called a synaptic touchpad, plus a ball in the center of the keyboard, with two buttons (right and left clicks). The os is windows 2000, and i use ms office 2003. The problem is at times, say usually when i have been using the laptop for 20+ minutes or so, the mouse indicator (pointer) on the screen suddenly "comes alive" and veers off to the right, left, top or bottom - and off the visible screen. At times like this, using the external mouse does not bring the pointer back. I literally struggle (no jokes!) With the ball to bring the mouse back into focus, and click on the links i need, or i use keyboard commands. This problem is really compounded when there are multiple windows open, the windows either start replicating, resizing or closing. Mostly this is so infuriating that i shut the system down. I use the power off button since because of all the activity on the screen, i am not even able to shut down. When i start up again, things are back to normal, well at least for sometime! Any suggestions?

Posted On: August 17th, 2004, 07:21 AM . View Related Posts . . View 6 Replies .

Usb Mouse Is Recognized But Cursor Does Not Move

I have installed a new hard drive and after loading windows. I can not use the mouse. I was originally using a usb mouse that is recognized but cursor does not move. The mouse isn't recognized at all when connecting to the actual mouse port.

Posted On: December 12th, 2004, 01:31 PM . View Related Posts . . View 1 Replies .

Huge Mouse Cursor In World Of Warcraft

Since upgrading to a 5870 card, whenever i play wow my mouse cursor increases in size to about double the normal size. If i turn off hardware cursor in wow it goes back to normal. Funny thing is that when i quit to windows 7 it still stays larger than normal. I tried installing wow from scratch. The second that i put the wotlk disk in and started the installer the cursor in windows 7 increased in size just like it did in the game itself !

Has anyone else found this happening to them ? It's bloody annoying me.


Posted On: 10-03-2009, 01:51 AM . View Related Posts . . View 2 Replies .

Mouse Cursor Random Movement Horizontally Across The Screen

I have been having this problem for the past few months. The mouse cursor just flies across the screen to and from horizontally. This problem stopped when i installed a internal modem but started again when i removed it. The motion stops when i disconnect the mouse when the computer is running. So the problem most probably lies with the mouse, mouse cable, or mouse connector. I need to narrow down the source of the problem. Does anyone have any suggestions on how to do that.

Posted On: July 12th, 2005, 03:36 AM . View Related Posts . . View 10 Replies .

Mouse Cursor Occasionally Spin Off And Go To Edge Of Screen

Well, before i overclocked my cpu and gpu, my mouse would occasionally spin off when doing anything, it go to the edge of the screen and for a couple of seconds you have to spin the mouse about the mouse mat until it come away from the edges. Now after overclocking, it seems to be happening a *** of alot more, this is bloody annoying during games. Any help / advice?

Posted On: 12-28-2005, 08:46 PM . View Related Posts . . View 5 Replies .

Mouse Issues When Move The Cursor In A Diagonal Direction

Okay so i've been trying to figure this out for a couple of days and my mouse has been really bothering me. Prior to my reformat, my razor diamondback performed flawlessly. After i reformatted my computer a couple of days ago (with a real version of winxp mind you), it would have problems when i tried to move the cursor in a diagonal direction. Before the reformat, when i moved my cursor in a diagonal direction (regardless of speed) it would smoothly move diagonally; after the reformat however, the cursor would either move down then to the side or to the side then down instead of smoothly moving diagonally like before. All the drivers have been installed (the same ones that i used before) and nothing has been physically changed. It's driving me crazy because i now have to spend extra time trying to aim the cursor to click the right button when before it would take less than a second. I've also tried to use the other usb ports on my computer as well with the same result, my logitech mx revolution also has the same problem albeit less noticeably so i'm using that for now. Any help/ideas would be greatly appreciated.

Posted On: 12-20-2007, 05:34 AM . View Related Posts . . View 3 Replies .

Mx700 Mouse Cursor Shoots To The Left Of Screen

Sometimes when i pick up my mouse, the cursor shoots to the left of screen, this has just started happening out of the blue.

Posted On: 03-03-2005, 10:50 AM . View Related Posts . . View 4 Replies .

Mouse Cursor Shoots Towards The Left Upper Of The Screen

When i'm scrolling around the screen, the cursor pauses as it heads/directed towards the the left or left upper side of the screen. It starts to studder and with like the power of lighten somethings shoots towards the left upper 1/3 of the screen and crashes the system. No blue screen of death, and if any animation is playing it continues to play, but there is no response from the mouse nor keyboard and the only thing that works is the off button

Anyone heard of this crazyness b4. I know a moth can crash a system (hence the term computer bug :p) , but a mouse doing this is strange.


Posted On: January 11th, 2004, 06:48 PM . View Related Posts . . View 4 Replies .

No Signal To Monitor, Keyboard, Mouse, No Beeps

My computer isn't very old, no more than a year, it's been working fine. No new software or hardware. I haven't moved it. This morning it wouldn't boot up properly. After clicking the button, it gave 1 long beep and 2 short ones. No signal to monitor. I didn't check keyboard or mouse. All fans appear to be working. I replugged everything to make sure nothing was loose, and turned it back on. No more beeps, still no signal to monitor. Keyboard and mouse aren't lighting up. I tried unplugging the power cord and pressing the button to clear the power. Still no beeps, no signal. All fans are still working. Any suggestions please?

Posted On: 06-12-2010 . View Related Posts . . View 2 Replies .

Mouse Cursor Regulary Drifts And Shoots Randomly Across The Screen

Any optical mice that perform flawlessly? Im currently on my fourth optical mouse. Ive sent back three and am about to send back this new one which is a packard bell optical mouse. With all four ive experienced the same problems. The cursor regulary drifts and shoots randomly across the screen making it impossible to play games and internet surfing is touch and go as i often click pop-ups by accident. I thought these problems only affected wireless mice but it seems both types suffer. My brother also has an optical mouse and gets the same problems. This just isnt on when will a company address this problem. The market has been almost completely taken over. Ive tried fowarding my opinians to logitech, microsoft and packard bell and all have ignored me.

Posted On: 18-11-2004, 10:55 PM . View Related Posts . . View 5 Replies .

Usb Ball Mouse Cursor Randomly Jump Around The Screen

Basically, what's happening is, from time to time (usually every minute or so) my cursor will randomly jump around and hug the sides of my computer screen. I can move it vertically, but any attempt to move it any other way either doesn't work or causes it to jump around again. It's just recently started doing this (about two or three hours ago; i was using photoshop with my graphics tablet), and it even moves around when my mouse is unplugged or disabled, and disconnecting from the internet changes nothing. I've tried updating my drivers, even uninstalling them and letting windows reinstall the basics ones. I have uninstalled my tablet's drivers as well. Both avg and spybot turned up blank when i had them run scans, and i've gone through every option in the mouse menus, adjusting speed, precision, etc.computer is a desktop. Windows vista home premium 32bit, usb ball mouse.

Posted On: 01-09-2009, 05:01 AM . View Related Posts . . View 1 Replies .

Usb Laser Mouse Cursor Whizz On Upper Right Of Screen

I recently purchased a new computer for a decent amount of cash but the mouse is acting weird. When you pick up a laser mouse the laser generally dims so that the cursor doesnt' freak. But my laser doesnt dim so if i pick it up to move it the cursor whizzes to the upper right of the screen. This is very annoying for gaming and generally everything else, however, the mouse works fine in my laptop. Im not exactly sure of the brand but im thinking logitech keyboard/mouse combo. It says aspire on it, if thats means anything.

Posted On: Feb 12, 05 at 11:26am . View Related Posts . . View 3 Replies .

Usb Problem - Pc Beeps Fast And Disconnects Mouse, Keyboard

When i plug in datacable for my w700 phone into any of the ports the computer starts to beep really fast and disconnects the mouse and keyboard, but the computer itself isn't frozen because i can still see the cursor changing shape. Restarting with the cable inside will result in freeze during dos (before getting into windows). I tried the cable on another computer and it worked fine, and my computer has already been using various usb components(camera, wireless adapter, webcam etc) without a problem. I've searched the internet for hours but can't seem to find the solution, has anyone ever encountered this problem or know what beeping and freezing mean when plugging a usb cord into the computer?

Posted On: 18-08-2007, 01:57 PM . View Related Posts . . View 9 Replies .

Computer Will Not Post, No Beeps

Turned on my main computer this morning after a week or so of it being off, and got nothing. The psu turns on, the fans spin, the hdds spin, the cd drives will not operate. In the past when i have seen this i get an alarm/beep/chirp from the system speaker letting my know of a problem - here i get no such indication. I reseated the processor and fan, removed ram, video card etc. Unfortunately i do not have a similar system to swap parts with. What does this sound like to you guys?

Posted On: 05-15-2009, 01:54 PM . View Related Posts . . View 10 Replies .

Computer Just Beeps Continually

I moved my fsb up to 200 and changed my system performance to turbo. And my computer just beeps continually when i try to boot up, and nothing comes up on the monitor. The fan turns on though. I have screwed my computer up, i am such a dumbass. Can i clear my bios somehow, or do i need to replace something? I have an amd athlon 2600+ and a nforce2 motherboard, ga-7n400e(-l), 1 gb ram

Posted On: March 19th 2005 . View Related Posts . . View 5 Replies .