Power Supply Made A Loud Pop Noise

Silverstone st75f power supply. I went to sleep, woke up, the computer was off. I tried to turn it back on, unplugged the psu, power button, etc, nothing worked. Then the power supply made a loud pop noise with a giant spark. I pulled it out and its dripping a whitish liquid. Anyone ever seen anything like this?

View Full Post With 9 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.

Power Supply Makes A Buzzing Noise And Wont Turn On

I was watching a movie and paused it to go get something to eat. When i came back i pressed space (my media player uses space for pause/play) almost simultaneously as i pressed the spacebar the computer shutoff. I waited a few seconds and attempted to turn it back on, but no go. When i press the power button a short 1 second buzzing sound comes from the power supply and doesn't power on. The motherboard light does turn on, im not sure what the light is but it is always on as long as the computer is plugged into the wall. As far as build up problems and signs, my computer was/has been running fine for over 3 years now. My motherboard is actually fairly new, i sent back my old one for a replacement a little over 14 months ago. I haven't got the time to check the voltage coming from the psu, but can i really if it wont power on? Also, considering that the onboard light on the motherboard comes on can this be a indication of a bad motherboard? Or other faulty hardware? Or does this sound more like a psu problem? My computer has ran flawlessly with no crashes or lockups. Until now apparently. My specs are:
Motherboard: asus a5prd1-v
Memory - 1gb (single module) ddr
Hard drive: western digital 160gb sata
Cdrom: sony dvd-rw x16
Video: ati radeon x800xl
Power supply: 350w codegen

Posted On: May 15th, 2008 . View Related Posts . . View 6 Replies .

Ram - Laptop Made A Rapid Clicking Noise

I have an ibm 600e series thinkpad and i put in 256mb of ram (originally it was only 128). This ram is brand new, out of the package, only that when i put it in, my laptop made a rapid clicking noise and it just stays on the turn on screen saying ibm thinkpad and the kb of ram in the upper lefthand corner. It never gets past this stage and i don't know why. I looked up my ram and it's compatible with my laptop. Is there a button i need to push or something i need to do in order for this to work?

Posted On: August 22nd, 2005, 05:34 PM . View Related Posts . . View 6 Replies .

Hp Computer Loud Noise / Sounds

I have a hp computer that started making a loud racing noise. The noise comes and goes, it sounds like a jet. ? The noise also changes or revs up and down. After a couple of min. The computer shuts off. Now it says there is a start up problem and says windows cannot fix the problem over the internet. I blew the dust out and checked the fan and it turns free. Any ideas what might be wrong?

Posted On: 3 months ago . View Related Posts . . View 6 Replies .

Psu Makes Loud Buzzing Noise

I got a new gtx280 today, i have installed it and booted up. Installed its drivers and reset the computer. Everything runs fine until i run a game; my psu makes a loud buzzing noise. I don't know why this is happening.

Posted On: Jan 7, 2009 . View Related Posts . . View 4 Replies .

Constant Loud Humming Noise On Boot Up

I hooked up an older desktop computer and powered it on. It powers up but it does not boot up, the screen shows no signal (amber/yellow light, not green). And there is a constant loud humming noise (not "beep, beep, beep" but like "beeeepppp. ")

I am pretty sure it's not a fan making the noise, but some kind of error code. All fans come on and stay on, no dust inside, the mouse shows it has power, but the keyboard does not have any power (no lights). I tried plugging things in different usb ports and other ports on the back of the case and using wireless and non-wireless mouses and keyboards, still same problems. And yes all the same hook ups i am using (mouse, keyboard, monitor, etc. ) Worked fine on this comp. Before

Also computer makes a little quieter hum when just plugging power supply cord into outlet without even powering it on. I don't know much about computers so can anyone tell me whats wrong here?

Posted On: 2 months ago . View Related Posts . . View 3 Replies .

Echoing / Loud Noise On Skype Call

Ok guys i been pulling my hair out on trying to fix this for the longest time, i've tried everything to messing with my audio settings and my friends settings. To getting different mics / using a different call program. The problem is i'll hear my self echo with a loud strange noise at random times (usually within 2-5mins it will start happening) if i tap on my mic about 6-7 times it will make it go away only to repeat 5 mins later. For the first few minutes the call is perfect no echos no noises or anything. I use headphones to hear audio and use a mic to talk that's plugged into my laptop. My friend uses a headset and is also using a laptop. I wouldn't think the problem would be coming from my friend because he doesn't have the same problem as me.

Posted On: 3 weeks ago . View Related Posts . . View 1 Replies .

Computer Boot Up - Loud, Annoying Beep / Squeal Noise

I believe i've got my entire computer assembled and i don't know what the problem is but when i press the power button to boot it up this continuous, loud, annoying beep/squeal whatever you want to call it starts up and i'm afraid i've messed something up but i don't know what. Anyone know what i did wrong/didn't do?

Posted On: 18-02-2005, 12:32 AM . View Related Posts . . View 5 Replies .

Lite-on Dual Layer Dvd-rw, Incredibly Loud Noise

I'm really disappointed in the noise level of this drive. I have 3 case fans, a pci slot-fan, an enormous heatsink fan, and the case is whisper quiet. Then along comes this drive, when it spins up there's the standard cd whirring noise, but it's also accompanied by a vibration noise, and once it's spinning at full speed a high subtle (but annoyingly noticeable) high pitched whine. Is this drive, or dvd-rws in general known for being particularly loud? If not, is there something i can do to try and bring this problem in check? It's really a sore spot on what is otherwise a flawless new system.

Posted On: 04-01-2005, 11:49 AM . View Related Posts . . View 1 Replies .

Convert Power Supply Of Laptop Into Power Supply For Pc

Is it possible to convert the power supply of a laptop in to a power supply for a pc? The reason i am asking this is because i have a motherboard, processor and some ram but no power supply and on the other hand i have an old laptop (circa1996) power supply.

Posted On: September 20th, 2009, 12:01 PM . View Related Posts . . View 5 Replies .

Power Supply Problem

I have been messing with my two computers trying to upgrade them with the parts from one putting them into the other, since the computers are almost the same. Well, as soon as i plug in the power cord to the power supply, it sounds like it is starting up for a second, then shuts off. Then the computer wont start at all. It seems like a fried power supply to me, but i wanted to get other peoples opinions. What could it be besides fried?

Posted On: December 2nd, 2005, 06:32 PM . View Related Posts . . View 8 Replies .

What Happens When You Overload A Power Supply?

Ok guys for ten points who can tell me what happens when you overload a power supply. Im curious for safety reasons. Can it damage other componants(if yes how likely is it).

Posted On: 24-11-2004, 06:49 PM . View Related Posts . . View 9 Replies .

Which Ups Power Supply?

I'm looking to purchase a ups power system, but before purchasing i need to make sure the ups will be of the correct va power for my sytem. The only details i can give is that the power supply in my pc states (450w) my system is a desktop pc consisting of a monitor, modem, monitor speakers and the pc itself, i may also wish to add another component to the desktop in the future, given these details could anyone recommend the correct ups power system for my desktop.

Posted On: November 6th, 2008, 10:39 AM . View Related Posts . . View 13 Replies .

Power Supply Wattage

My brother's power supply died and he asked me to help him find a replacement. He built the computer about 3 maybe 4 years ago so it's due for a memory upgrade at the least and probably a new processor. The old supply is 400 watts, but i'd rather he bought a better one, maybe 500 or 600 watts at least so that he can upgrade later without a problem. Will a higher wattage affect his current hardware?

Posted On: June 30th, 2009, 10:56 AM . View Related Posts . . View 4 Replies .

Possible Power Supply Issue

I have a system i built myself i have a asus motherboard and amd sempron 2800 1. 7 ghz processor with a 350 watt power supply, 512 ram, dvd combo drive and 80 gb hard drive. I have this problem where i can run windows pro fine for a average amount of time and after i do a shutdown and the system completely shuts down i push the power button to bring back up the system and only the fans come on. No power what so ever to my hard drive or dvd burner and obviously my motherboard isn't getting power either. What have to do is unplug the power from the back of my power supply for about 15 min and plug it back in and everything on my system get all the power back to it.

Posted On: January 4th, 2007, 08:08 PM . View Related Posts . . View 7 Replies .

Atx Power Supply Question

I need a psu, but the server i need it for has a strict 24pin atx connector (not a 20+4 or any other variation). That's compaq for you. Check the pin config and let me know which psu i should purchase. Links to newegg or tigerdirect are appreciated. I really couldn't find a decent 24 pin atx psu @ newegg. I'd like to get a quality psu like an enermax, because this is a server after all and it will be on all the time. The original is beginning to die (fan starts going nuts).

Posted On: April 6th, 2006, 12:45 PM . View Related Posts . . View 13 Replies .

What Use Is An Adjustable Speed Power Supply?

Why would i need one of these, versus a standard power supply? Wouldn't i just leave it on the high speed?

Posted On: 01-13-2004, 03:01 PM . View Related Posts . . View 3 Replies .

Power Supply Problem / Spark

Today i had my second antec 300 watt smart power go boom on me. When i say boom, i mean boom. Sparks and loud noise then the air smells funny like burnt wire. I have no clue what can be causing this. I have my other machine (with an enermax power supply) plugged into the same power strip(which may be the problem). Any ideas of what can be causing this? Could the motherboard be causing this some how or am i just really unlucky with power supplies?

Posted On: 01-07-2004, 05:18 PM . View Related Posts . . View 4 Replies .

Problem With Case / Power Supply

I bought a case and put some older components into it to build a new system. When i powered up the monitor would never come on so i tried replacing each component. I add new motherboard, new processor - all with the same problem. I do not even get a signal to the monitor or bios info or anything. The only thing left to replace is the case/power supply. Is there something i should be taking into consideration when buying a case/powersupply - i had thought that was fairly straightforward?
The case is: jnc 4ja h7650 blue type 3 atx midi tower case 300w psu front usb firewire & audio, my motherboard (msi km2m combo) has on-board graphics & ddr and sdram (i've tried both) bought as i thought initially the graphics card might be a problem.

Posted On: August 9th, 2004, 06:07 AM . View Related Posts . . View 7 Replies .

Power Supply With Pentium 4 System

Anyway, i am planning on building a pentium 4 system and was wondering what power supply to use. I have used psu "calculators", but is it okay to go with more wattage than it says. I don't want to fry my motherboard. Is there any danger to giving it say, 400 watts, if it only needs 315? I might be upgrading later.

Posted On: August 25th, 2007, 02:05 PM . View Related Posts . . View 5 Replies .

Computer Shuts Down Power Supply

My randomly shuts down after about an hour or so and when i try and turn it back on it lasts about 1 minuit then it switches off again. After about 3 times trying to turn it on it beeps about 4 times then it says "cpu overheated" then some windows restore stuff then it switches off, at first i thought that it could be that the processor fan wasn't working because when i took the cover off the metal bits around the fan were very hot. I dont know what to do about this and i have no idea what is not working. I don't know why the cpu is overheating because the fan that cools the processor is spinning. If there is a fan on the power supply i dont think it is spinning because i cant feel any air coming out. My motherboard is an asus p5gdc and there is a a nvidia geforce pcx 5750 plugged into the pci-e x 16 slot and there is a modem which i have never used in one of the pci slots and two 256mb sticks of ram in the blue slots and thats all. There is a fan in the back of the case, a fan covering the processor i think there is meant to be a fan in the power supply and there is a fan in the side. Does anyone have any idea what this problem is and what can i do about it. It normally shuts down when im playing games. The only games i play are the sims 2 and halo, my problem first started when i was playing sims 2, the first times it happened it didnt shut down, it only restarted. Then it started to shut down and keep shutting down with the cut out time becoming shorter and shorter. Anyone had this problem before?

Posted On: Jan 18th, 2006 . View Related Posts . . View 4 Replies .

Computer Power Supply Died

The power supply on my wife's computer just died and in dying it wiped out the memory and may have damaged the motherboard or the cpu. Has anyone heard of this before?

Posted On: Jan 10th, 2008 . View Related Posts . . View 8 Replies .

Antec Power Supply Failure

I've built quite a few desktop pcs systems, from motherboards, etc. And, i've also repaired quite a few machines (e.g.compaq, hp, gateway, etc). It seems that power-supplies are the failure point much more often than i had expected. Once again, a couple of days ago, on a six-month old machine i own and built, (with good fans, no overclocking, etc), i inserted a 2nd ethernet-pci card into it, and when i brought it up for the first time, it wouldn't boot. (No smoke or noises. )The little activity light seemed to indicate random action, just as though it was seeking the disk and booting, but nothing ever showed up at the console, not even initial bios output. So, i took the case-side off, and hooked up my little power-supply tester-unit. Sure enough, one of the tester's multiple green lights did not light up, and that red 'danger' light on the tester did light up! [It's a fairly nice antec 400-watt supply, which is plenty of wattage for this system. It is an antec model sp-400 'smartpower'. ]

Any advice or comments about how often power-supplies fail, or thoughts about why this one might have?

Posted On: April 20, 2007 . View Related Posts . . View 18 Replies .

Power Supply Failure Rate

According to be hardware these are the power supply failure statistics for the previous year, like all statistics they should be taken with a pinch of salt. They confirm though what most hexites knew already. Fortron: 0. 7%
Hiper: 1. 2%
Seasonic: 1. 4%
Thermaltake: 1. 6%
Tagan: 2. 8%
Enermax: 3. 0%
Antec: 9. 5%

Follow the link for details:-

Posted On: 22-01-2007 . View Related Posts . . View 25 Replies .

Power Supply For Dell E520

Can anyone recommend me a good power supply for the dell e520. I'm looking to upgrade my video card to nvidia geforce 7 series, so i guess something around 400w with be sufficient? I'm a total new when it comes to power supplies so any help would be greatly appreciated.

Posted On: November 26th 2006 . View Related Posts . . View 5 Replies .

Power Supply That Has Two 20-pin Connectors

I'm looking to replace a power supply on a magma chassis that is used to supply power to 7 hd cards for a pro tools system. The current power supply is just loud as crap and i need something quiet. The current model is made by channel well technology, 400 watts, and the model number is psg400p-89. The difficulty i'm having is finding a power supply that has two 20-pin connectors on it. The power supply uses two of these connectors to power the main board. I noticed a splitter on ebay that takes one 20-pin connector and splits it into two, but i don't know that this would give me the right amount of power, would it? I'd probably rather have something that had separate connections running straight from the unit. I also want it to be quiet, since that's the whole point of me doing this in the first place.

Posted On: July 12th 2007 . View Related Posts . . View 2 Replies .

Power Supply Adapter Myth

I recently built a new computer and noticed my power supply has a 20 pin connector to the m/b but i need a 24 pin. So naturally i am trying to find a little adapter that makes the 20 pin into a 24 pin male for the mobo. I heard from some people that there is around a 50/50 chance that this adapter will fry my motherboard, or possibly my power supply. Is this true?

Posted On: February 8th 2005 . View Related Posts . . View 13 Replies .

Jumper Power Supply Permanently

Basically, are there any power supplies that i can "jumper" permanently. My goal is: i have an empty atx case, but as far as i'm concerned, its an 8 bay hard drive nas case or how ever you want to look at it. I had the default power supply in it, and i jumpered the green and the black pin to keep the power on with out a motherboard and it worked great! But after a month or so, the power supply did die, as all the blogs/forum post suggested it would. Is there any thing i could do to power 8 hard drives in an empty case, with out a failing power supply? Do they make power supplies that are able to run with out a motherboard? Or perhaps an option i have yet to find?

Posted On: May 2nd 2008 . View Related Posts . . View 6 Replies .

How Important Is Amperage In Power Supply?

I am trying to decide weather i should get a silverstone 500w psu (power supply) or a hiper 580w . Now the silverstone has a total combined amperage of 36 @ 432w while the hiper has 30a @ 360w. Yet the the silverstone only has 150w total for 3. 3v and 5v @ 25a each while the hiper has 280w total for 3. 3v and 5v with 3. 3v @ 28a and 5v @ 36a. How important are the 3. 3 and 5 volt rails for a gaming pc?

How low is too low for such a system? Should i go for higher 12v and lower 3. 3/5v or vice versa?Please try to be as objective as you can. I know that silverstone is a very popular name and i would hate to have information skewed by biased opinions. I have read that newer mobos do not need high amperage on the 3. 3 and 5v rails yet i like to view more than one source on such matters.

Posted On: March 3rd 2007 . View Related Posts . . View 5 Replies .

4 Pin Connection In Power Supply

What is that 4 pin connection in a power supply for? Not the one for the hard drives, but the one that is square

Posted On: 2 months ago . View Related Posts . . View 3 Replies .