Advertisements:




Bios Flash Failure


This acer aspire m5100 desktop was having freezing issues, so i decided to update the bios to see if that would fix things. The flash was going well, until the very end where the status bar showed red, indicating failure to write at those sections. The computer rebooted and failed to post. Fans spin and everything, but nothing shows up on the monitor and no beeping from the motherboard. What do you guys think? Game over? Or is there some way to revive the computer?

View Full Post With 5 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Usb Flash Drive Failure

Three times-once each with three different flash drives, and on six different pcs-i've had the experience of finding that the computer won't recognize the drive, and the data on the drive has become inaccessible. I see this is a common problem. Other users ask for advice on the web, and nobody seems able to offer any solid information on this occurrence. In none of my incidents has the flash drive been dropped, heated, frozen, or dropped into a liquid or run through a strong magnetic field. One day they work; next day they don't. Anybody know why or what could be causing this issue? And whether my data is permanently lost in such cases? Three times, three different flash drives can't be a coincidence!

Posted On: 5/23/08 . View Related Posts . . View 137 Replies .

Bad Bios Flash

I think i broke my mobo. I was updating my bios to the newest version using winflash since all the utilities don't work on win 64. Winflash was provided on the setup disk anyway, see specs for mobo. So do i have to hope they will take an rma or something. Everything starts but dosnt boot. Tried the cmos battery and the jumper as if that would frackin work but i didnt know what to do. Any help would be appreciated usualy i just fix that sort of stuff on my own but never done this. It was flashing and just as it completed the first pat of update all i got a memory conflict error. Bsod.

Posted On: 05-24-2009, 12:09 PM . View Related Posts . . View 21 Replies .

Failed Bios Flash

I'm just wondering on what anyone would have to do if they was to flash their motherboard bios and it failed. I've just downloaded the nfm 1. 3b6 modded bios with a 1t fix, i'll be flashing soon enough but want to know what to do before i flash the bios and what to do if i encounter a bad/failed bios flash?

e.g:

If i need to make a backup - how?
If i need to do particular step-by-step procedures; what are they?
How to tell the bios flash failed? - Boot problems? (Wont run?) - If it runs it's done right, correct?
If the bios flash fails, how would i fix it?

Those are just what sprung to my mind then when i finished downloading the modded bios lol! I've never flashed a bios that went wrongly, and the only bios flashes i've done have been through msi's live update. (I have an msi boot flash disk) which was made when i first updated my bios from the live update procedure though!

As for the moment, i have just recieved my arctic silencer nv5 rev. 2 which will be going on the graphics card when i buy and recieve an xp-90c and some ac5 thermal paste, because soon enough i'm going to start overclocking, but beforehand do a lot of reading up about it .


Posted On: 11-16-2005, 02:35 PM . View Related Posts . . View 16 Replies .

Bios Flash Problem

Ok i am attempting to flash my bios on my new msi dka790gx however i have no idea how. The document said i must create a boot floppy off from an win98 machine. Only problem is my mobo doesn't support win98! Sorry my noobness is showing.

Posted On: 01-21-2009, 10:11 PM . View Related Posts . . View 15 Replies .

Bad Flash Bios

I recently flashed my bios with what i thought was the right one.guess i was wrong.computer was working fine with no problems, then after the flash my computer now locks up at the first screen which is the oem screen where you access the bios or boot sequence. I unplugged everything and plug everything back in one at a time to find my problem (hdd). When power is supplied to the hdd computer locks up, when no power is supplied i can access the bios or run a disc. Now this is any hdd for i have tried three different ones and i get the same result. When i enter the bios i can plug my hdd in and it is detected (i know your not supposed to do this from my research) but when bios is exited same problem. My question is how could flashing the bios make this problem arise and how can i solve it. And yes i have removed everything, including battery and switching the jumper to clear cmos. I am not sure if this is relevant but after clearing the cmos start up screen says "checksum error defaults loaded".

Posted On: May 13, 2010 . View Related Posts . . View 7 Replies .

Radeon 9800 Pro Bios Flash

I've been reading these forums for quite some time on overclocking my cpu and video card which all have helped greatly. Now i have a question. Flashing the video card bios, how is that done exactly or is it recommended? I noticed ati tray tools have an option to dump the card bios. What does that do exactly?

My radeon is a saphire brand, i noticed on their website they have a bios flash utility, winflash. Does that flas my card bios to the most recent bios? Again is this something i need to do, should do?


Posted On: September 27th 2006 . View Related Posts . . View 3 Replies .

How To Flash Bios On Abit An8 Sli Mobo ?

Just wanted some tips on how to flash bios on my abit an8 sli. Mobo im having start up problems- my system just 'sits' at the mobo post screen and doesn't go through to windows want to flash my bios chip on mobo- i think this might help because i have tried everything else.

Posted On: 03-11-2007, 12:46 AM . View Related Posts . . View 2 Replies .

Flash Ati Radeon 9600 To A 9600 Pro Bios

In dos mode it tells me my card is a 9600 pro? Is that correct i have samsung memory on my card and i read it may be a 9600pro. Does that mean i may switch bios to a 9600 pro bios?

Posted On: May 20th 2006 . View Related Posts . . View 7 Replies .

Total Pc Failure

Copying cd and computer went blank with no video signal. Re-boot no effect- no boot sequence noises and no video signal. Swapped video card checked connections, swapped monitor - no go. There is power to components. Motherboard failure?

Posted On: 05-09-2004, 09:43 PM . View Related Posts . . View 5 Replies .

Intermittent Boot Failure

The problem is intermittently the system powers up but fails to even attempt to boot - no bios beeps, and bios and vid. Bios screens not displayed. Drives spin up ok. Have tried different case and psu (in fact system is currently in borrowed case). The system only ever fails to boot if the system is cold-started - the system warm-reboots ok. Tried different ram, had m/b replaced once, new m/b been returned to dealer where they (supposedly) found no problems when tested with other kit and with my psu, but system not been professionaly tested as a whole. Have also tried different graphics card, removing modem and sound card, running system from hdd only, but still having problems. All connectors are firmly seated. There are no config options in bios or jumpers for ram and the cpu is set up correctly and automatically. Have used 375 and 300w psus with system (300w seemed better then system started playing up again)
Nvidia geforce4 mx440 agp8x graphics card (8x is supported by m/b), and have also tried geforce2 4x. The os may be irrelevant, but i've tried winxppro, win2000, winnt4, mandrake linux 9 and a linux distro that boots from cd (knoppix). All drivers installed ok. Won't even bother with win9x/me because i hate it.


Posted On: November 12th, 2003, 01:47 PM . View Related Posts . . View 14 Replies .

System Failure ( Restart )

Built this and it has never run without having a system failure resulting in a restart. I tested the old power supply, and the 5v connector failed. So, i bought a new one and figured that this would be the fix to the issue. And no. Any suggestions on what i might look for next? I'm lost.

Posted On: 05-01-2007, 05:08 AM . View Related Posts . . View 13 Replies .

Random Power Failure

Lately, my pc has been randomly shutting off. I thought it might be a software issue, so i went to reformat my hd when it powered off. Here i am with a box w/ no os that keeps shutting off every 5 minutes. Every other computer in my house works fine, so it isn't an electricity issue. I also replaced the power supply, which cost me $60. What else could possible be causing theis odd phenomenon, because i would like my pc back.

Posted On: May 8th, 2007, 04:29 PM . View Related Posts . . View 14 Replies .

Bsod - Hdd Failure

I'm running xp pro sp3. I can't remember the last time i've installed new hardware or software. Out of the blue the other day, i noticed foobar2k wasn't reading some of my music off my drive. I checked the files themselves on the 500 gb, and when clicking on the folder received a message to the effect that the files were not accessible. Found that kind of alarming. Then later in the day, experienced my first crash. Just a complete as-is freeze up with stuttering audio that never budged even after about a 30 minute wait-out. Rebooted and chkdsk popped up for the 500 gb drive. I figured as much. However, chkdsk would repeatedly fail to complete. I used another utility, spinrite, directly off a boot disc. Without even being in windows, it still froze about ten minutes into it. At this point i basically could not keep my computer up and running without it soon crashing. I pulled the 500 gb drive to just give up for now. Everything seems like it is running more or less stable with just the raptor. But then, i decided to usb transfer some of my music to the raptor from my blackberry (setup to act as a flash drive). Within about 30 seconds i got my first ever bsod on this machine. 0x0000008e (0xc000001d, 0xbf852646, 0xac387698, 0x00000000)

Win32k.sys - address bf852646 base at bf800000 datestamp 48025f2a

Anyone have any idea what could be going on? Google results for the stop code gave vague suggestions at best. I really don't even know where to begin!


Posted On: 07-30-2009, 09:50 AM . View Related Posts . . View 3 Replies .

Motherboard Failure Rate

I'm a system builder, and i order most of my parts from newegg. In my i7 systems i have been using the asus p6t deluxe v2 for almost all my builds, but lately i've had over 50% failure rate with the boards. This is over the last month and over 27 units. I'm just wondering if other builders are getting the same failure rate, or if i just got a really bad batch. Its so bad at this point i'm ready to switch to another board, but i'm not sure which one to move to. I need boards that overclock well (4. 0 ghz on the 920 with liquid cooling) and have dual lans. Of course, they have to support at least 2 video cards in full x16 mode also. I'm thinking of trying the asrock supercomputer x58. Any comments or suggestions from people who are having similar problems or have a great mb they've used for a lot of builds will help.

Posted On: 04-20-2009 . View Related Posts . . View 21 Replies .

Lcd Monitors Failure Causes

To date, i have got my hands in over 10 malfunction lcd monitors. The cause of deaths for all of them but one were power failure of some sort. I think the lcd company intentionally did this to make people buy new ones. Here are some of the causes:-
1. Premature aging or leaking of electrolytic capacitor: either because of the use of capacitors with lower temperature rating or, for save a buck or two, use capacitors of un-trustful brand(s). Replace the capacitors usually brings the lcd back to life. 2. Dead external power adapter: especially the ones with a strange output voltage which is not easily replaceable. Depends on how the adapter is assembled, you might need to force it open to find the real cause. 3. The most strange ones are the so called "cold soldering": in some larger lcds, i found the solder of several components on the internal power board were loosed! Ideally the power board in a lcd monitor should not have cold soldering, which i think it is a truth when it was built. However, solder may became loose if, after the soldering work of a power board were done, there are external forces applied onto certain components (e.g. The ones connect to a big heat sink which were than stressed by screw onto something else ). In such case, adjust the angle/position of the monitor may put excessive force on the soldering point and eventually break the connection between the legs of the ics and the solder. Re-attach the solder could be your best choice. 4. Unstable relay. Due to the fact that some solid state relays are highly temperature sensitive, the current a relay can output/conduct may decreases dramatically as the temperature increases. The result is intolerable blinking monitor. For emergency, try to ventilate the relay, in the long run replace it with one of the same specification is your best choice. Not recommended, but, if you know what circuit were controlled by that relay and the function of the circuit, you may be able to short circuit it and make it permanently on or remove it to make it permanently off or connect a manual switch to turn it on/off by hand. 5. I never encounter this but lcds with faulty thermal fuse(s) or blown fuse(s) were reported in this forum. Replace the fuse might be a reasonable thing to do. However, if it blown again, you might need to check other places.


Posted On: February 13th 2007 . View Related Posts . . View 1 Replies .

Pata Hdd Complete Failure

First my new system dies, and then my old system decides to go and kill itself aswell. Ok, this time its an old pata hdd that something went wrong with (i did this to it). What happend? Well, i had a nasty virus and had to get a real "tool" for the job. A program that use dod* method to erase everything from the harddrive. Let's just say something went wrong on the way, and now it's competely unreadable. So i got my hands on some seagate tools, and i really don't have a clue what to do with it. There is something so wrong it can't update the mbr of the drive. Shall i call it even and throw it away, or is there anything i can do?

Posted On: 03-16-2008, 12:08 AM . View Related Posts . . View 24 Replies .

System Failure, Monitor Does Not Show Anything

I returned from vacation. Turned computer on, fans came on, green light came on, i could hear the hard drive spin up and sound normal, but that's it. No beep, no yellow light, the monitor doesn't think anything is running, the keyboard is dead, num lock won't illuminate, optical mouse is out. Can anyone give me an idea? I'm not very computer literate ( as i'm sure you're aware after reading the earlier part of my post) the computer is a 3 year old hp.

Posted On: August 5th, 2006, 10:21 AM . View Related Posts . . View 1 Replies .

Failure To Boot From Hard Drive

I have two hard drives. I tried installing windows vista business on the first one to use in a dual-boot configuration with windows xp which was on the second hard drive. Well, the vista installation worked fine, but when i went to boot into xp, i found vista's boot loader hadn't recognized windows xp. Clearly frustrated, i tried several different things until i finally decided to format the first hard drive. It was horrible i lost my entire data from the hard drive. Vista made my data vanish. I hate it. I tried using repair tool and many recovery software, but it did not work.

Posted On: 17-02-2007, 04:06 AM . View Related Posts . . View 3 Replies .

Hard Drive Failure When Booting

I have been having trouble with my desktop when i boot up. I am getting a "hard drive failure" when i boot and it asks for me to insert a system disk (which i can't find at the moment). So far i have been lucky enough that after a few tries it will finally boot up and run just fine. I try not to shut it down but from time to time i forget and shut it down only to be reminded why i shouldn't do that the next time i try to boot it up. But, i am afraid that it will someday no longer do this. I have purchased an external hard drive so i can copy the contents of the bad drive to it before i replace the drive, but am not sure what to do or how to do it. I would apprieciate any help you can give me. I have seen in another post on this site a program mentioned by the name of hdclone. I have found a free version of this and am interested in knowing if this is something i need to transfer the contents of the old drive to the external one? Also, the old drive is an ide but when i look online for a new drive they are sata or pata drives. What are they and will they work with my current setup?

If i recall correctly, the external hdd is about 120gb and the old hdd is 60gb. I am running windows xp pro. Since i am unable to locate my xp program disk at the moment i want to do everything possible to not lose this on the hard drive. If you need any further information, i will do my best to supply it.


Posted On: January 15th, 2007, 11:42 AM . View Related Posts . . View 8 Replies .

Hard Drive With Potential Failure

I have 2 of the seagate 1. 5 tb models which i bought before i was informed of the failure rate and i figured that it would be wise to ask here if i should be alarmed because if i dont check now i never will. Basically my problem is that the drive tends to "stall" after a period of idle time. It is usually only an issue in windows but it happens too often now. For instance, i go to my computer in the morning and click on the folder on the drive (which is the secondary non os drive for storage) and it will stall and about 3 seconds later there is a small click sound as is if it were trying to find its place. It is very annoying so i really want to resolve it. The thing is other seagate drives that i have had have done the same thing to me without failure for years, and instead just leaves me annoyed. I for one am pretty mad about the epidemic with these drives but if anyone has suggestions i am open to them.

Posted On: 05-10-2009, 10:46 AM . View Related Posts . . View 4 Replies .

Antec Power Supply Failure

I've built quite a few desktop pcs systems, from motherboards, etc. And, i've also repaired quite a few machines (e.g.compaq, hp, gateway, etc). It seems that power-supplies are the failure point much more often than i had expected. Once again, a couple of days ago, on a six-month old machine i own and built, (with good fans, no overclocking, etc), i inserted a 2nd ethernet-pci card into it, and when i brought it up for the first time, it wouldn't boot. (No smoke or noises. )The little activity light seemed to indicate random action, just as though it was seeking the disk and booting, but nothing ever showed up at the console, not even initial bios output. So, i took the case-side off, and hooked up my little power-supply tester-unit. Sure enough, one of the tester's multiple green lights did not light up, and that red 'danger' light on the tester did light up! [It's a fairly nice antec 400-watt supply, which is plenty of wattage for this system. It is an antec model sp-400 'smartpower'. ]

Any advice or comments about how often power-supplies fail, or thoughts about why this one might have?


Posted On: April 20, 2007 . View Related Posts . . View 18 Replies .

Power Supply Failure Rate

According to be hardware these are the power supply failure statistics for the previous year, like all statistics they should be taken with a pinch of salt. They confirm though what most hexites knew already. Fortron: 0. 7%
Hiper: 1. 2%
Seasonic: 1. 4%
Thermaltake: 1. 6%
Tagan: 2. 8%
Enermax: 3. 0%
Antec: 9. 5%

Follow the link for details:-

http://www.Behardware.com/news/8550/power-supply-failure-rate.html


Posted On: 22-01-2007 . View Related Posts . . View 25 Replies .

Delayed Write Failure Error

Recently, i purchased a western digital premium es 500gb external hard drive. I formatted the hd from fat32 to ntfs, and reinstalled all the original software that shipped with the device. Transfering files from my pc to the my book works fine. However, when i attempt to transfer large files (usually above 2gb) from the my book to my pc, i receive a "delayed write failure" error message. The device stops responding, and i have to power it down and restart it. I am running windows xp sp2, and vista ultimate. I have experienced this problem in both operating systems. The device is connected to a usb 2. 0 pci controller card i purchased two years ago. All the ports have worked fine in the past, and i have never had problems with other peripherals connected to the port. All connections appear to be secure.microsoft kb article 908673 discusses this issue and is releasing a hotfix (kb908673) w/xp sp3. I found and installed the hotfix, and continue to have the same problem. Has anyone experienced similar problems with an external hard drive? Does anyone know of a solution for this issue?

Posted On: August 16th 2007 . View Related Posts . . View 12 Replies .

Ink Delivery System Failure

Hp multi function printer c7130? Was working ok, printed a good a4 picture then a pop up said " ink delivery system failure , there was a fault code . I have followed various suggestions to reset chips etc but nothing has worked so far. This printer cost plenty so i wonder if by chance someone may have had the same fault.

Posted On: 2 years ago . View Related Posts . . View 1 Replies .

Hp Photosmart Ink System Failure

Hp photosmart 8250. Upon replacing the cartridge the screen said "ink system failure" & won't work. Tech couldn't fix. The tech and i did all the "usual" things to fix the printer but to no avail. I did use a hp compatible ink, same brand as i'd used before without trouble. I replaced it promptly with hp product. They gave me an error code of oxc18a0001

Posted On: 3 months ago . View Related Posts . . View 2 Replies .

Hp Photosmart Printer Cartridge Failure

I have a black hp photosmart all-in-one printer. I had it since september of last year and barley used it since i still got another working printer. I although set it up with my imac but never did print anything since i used the imac for more photo editing, music, and email. Today when i tried to print a word document, i turned on the printer and it said the cartridge failed? I still have the ink cartridge that came with the printer. I don't understand the cartridge is full. I tried taking it out and turning it the printer off, i uninstalled and reinstalled? What should i do?

Posted On: 6 months ago . View Related Posts . . View 4 Replies .

Floppy Drive Disk Boot Failure

Just built my own computer, and i cant install an os because the computer doesnt seem to find the floppy drive. I have connected the floppy drive to the motherboard with a 34-pin connecter, and i have the twisted end plugged to the floppy drive, and the long end to the mb. I noticed that one pin on the floppy drive (the second from the side) is missing.could that be the problem or should it be like that?

When i start the computer it says after counting the memory and all that, "verifying dmi pool data. Disk boot failure, insert system disk and press enter".


Posted On: February 19th, 2005, 03:58 PM . View Related Posts . . View 7 Replies .

Error 0200: Failure Fixed Disk 0

It is hard for me to throw away things that have been working. I am the owner of two dell inspiron notebooks. One is an 1100 (2003) and the one that is currently giving me the problem is a 2500 (2002). So you can see who you are dealing with. I upgraded the memory on both machines to 1g and 512mb respectively, not that long ago and they were working fine. Then i got this brainstorm to try to teach myself ubuntu and wiped out xp on the 2500 and burned an iso image of a ubuntu version and it was working ok except i couldn't connect to the internet even via ethernet cable. Time passed and then by the time i came back to it - there was a problem that i really can't recall - i posted on some other sites and the bottom line was, i thought i needed a new hard drive. So i purchased a compatible drive (i did a fair amount of research) and got the drive about 2 months ago and just tried to get it going this morning. I replaced my hitachi 20 gb drive with a seagate momemtus 5400. 3 40gb drive. When i boot up, the initial screen does show that it recognizes my new drive (model st940815a).

Posted On: August 29th, 2009, 02:51 PM . View Related Posts . . View 11 Replies .

How To Prepare For Hard Drive Failure On Laptop ?

I am about to order a new laptop, i have an option between 2 120gb (7200rpm) hard drives, or 1 250gb (5400rpm) hard drive. Right now i'm planning to go for the single hard drive. One thing that i am concerned about before hitting the final buy button, is hard drive failure. I've replaced my desktop hard drives (2 of them) on a few occasions (i go ahead and change em when i think their making noise). I usually just plug in the hard drive i want to swap out, and the new one i buy, then run a program that boots off a cd to clone the hard drive. With a laptop, i don't know how simple this might be. I'm thinking if i buy just a single hard drive, there won't be a 2nd sata cable for me to clone the hard drive with. And even if there is a 2nd cable, i don't know if i can run my laptop while the hard drives are out etc. (Assuming i purchase the single hard drive, perhaps there isn't physical room to put in a temporary 2nd hard drive)

I'm not really wanting to purchase the dual hard drive option for the laptop because its just extra money wasted, and higher battery consumption as i see it. Being mostly a desktop user and only a very rare occasions opening up the bottom panels of a laptop, i'm not sure what to expect. I just dont want to get stuck in a situation where i have to buy a replacement hard drive and lose everything and do a base install etc.


Posted On: March 27th, 2008, 09:18 PM . View Related Posts . . View 8 Replies .