My Hard Drive Is Dead

Yesterday a thunder (or lightning whatever) burned out one of my computers, that pc wasn't special in any way but the hard drive contains important stuff. I've tried to mount it in another pc but it just doesn't boot, seems like it is damaged, how can i recover my info?

View Full Post With 14 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.

Dead Hard Drive

I restarted my pc the other day. When i started it back up, it said "insert system disk". So naturally i took the case off, and looked at the hard drives. I have two hard drives, my primary, os hard drive and my storage drive. My primary drive won't take power. It's not the power cable, i plugged the storage drive in and it worked fine on the same cable. The hard dive doesn't spin, at all. Any ideas, or am i at a total lost without sending it to a dc?

Posted On: October 15th, 2005, 11:10 PM . View Related Posts . . View 10 Replies .

Is My Hard Drive Dead ?

I have an 80g sata that i have been using as my os drive for a long time now. I got it when sata drives were first becoming popular. I had xp on it, but last night i partitioned it in half with partition magic and put windows 7 32bit pro on the other half. I left my computer on all night. I got up this morning to no image on my screen. Eventually i manually rebooted and now my computer won't boot up. No image or anything, and i can't hear the hard drive making noise. Did my hard drive die on me? Is there any way i can test it without having a secondary computer to test it in? All i have other than my desktop is my wife's laptop.

Posted On: 10-24-2009, 09:31 AM . View Related Posts . . View 4 Replies .

Revive A Dead Hard Drive

For about two weeks i was starting the computer and as it ran startup for winxp pro it would crash to a blue screen with errors of a kernal_fault and stated it would dump ram to the hdd, which it never did. After a few restarts the computer was up and running again. Then one day the damn thing just didn't start. It kept rebooting itself over and over again. So i played around with it a little and checked all the cables and power, etc. Then all *** broke loose. I started my computer and while detecting ide drives the computer froze. I restarted many times and it always hung when trying to detect the drive. So, while it was hung i did a little experiment. I unplugged the power to that hdd that was the problem. Bam! It continues on until it realized there was no hdd. I tried this a few times and the same thing happened. So, i thought maybe if i could get another older hdd to load xp then plug in the disk, i might be able to detect the drive and correct errors or something? Anyway, cutting to the chase, 2/3 the way through an xp installation on a very old 6gig hdd the computer crashed to the blue screen with the same sort of message. I tried another installation of xp and the same happened. I am lost now, i have no idea what to do. I am not sure if both hdds are shot or if my memory is corrupt and my main hdd is shot.

Posted On: November 13th, 2005, 11:21 AM . View Related Posts . . View 14 Replies .

Data Recovery From Dead Hard Drive

Are there any softwares to recover data from a dead hard drive. Please help me in this situation since, my hard drive is giving some noise for almost 10 seconds while booting and not even detecting.

Posted On: December 25th, 2006, 01:03 PM . View Related Posts . . View 2 Replies .

Hard Drive Dead - Anyway To Recover Data ?

My fathers computer's hardrive died last night (atleast, i think so) the computer will just start up and once it gets to the windows loading screen, will just restart, i tried to put the hardrive in my computer and access it to get his files, but when i try it just sais that it's corrupted. I know there have been ways to recover data even when the hardrive has died / corrupted, is it possible i could do this?

Posted On: 09-05-2008, 03:29 PM . View Related Posts . . View 14 Replies .

How To Pull Data Off Dead Laptop Hard Drive?

I've done it multiple times in the past, but this time i fear the drive itself may be damaged. My laptop just died and i used a sata-to-usb converter to connected the pulled hard drive to an old power mac g4. It shows up in disk utility but doesn't mount. Any help is appreciated, as i foolishly don't have a backup. All i want to is to mount the drive one last time in order to perform a feel backup.

Posted On: 2009-08-02 . View Related Posts . . View 3 Replies .

Swap Electronic Boards From Dead Hard Drive

Okay, my friend has an ide 3. 5" western digital wd caviar 205aa 20. 5gb harddrive. Other info on the hard drive is: mfg date 5/19/2000, lba 40079088, model wd205aa-00ana0. She said the computer stopped working after several rounds of electrical surges due to an ice storm this past winter. So i pulled the hard drive, put in another one that i had and it powered up just fine inside the tower. I also have an external ide to usb cable with external power that i've used several times to power hard drives outside the box to move data to another pc by usb (so it works), but on her hdd still no power. I know there are professional services that could recover the data (she really wants/needs the data, but she's not willing to pay what they're asking - one quote was $700). I really think the electronic board on the hdd is probably what is dead. So my question is this. If i found another identical hdd could i possibly pull the electronic board off it and place it on the defective hdd? Anyone ever done this? I've heard of this, but i'm struggling to find any documentation on it. Also, i've heard that the hdd's have to be identical for the electronic boards to match and if that's so, does anyone know what determines "identical"? Is it the model #? I'm asking obviously because i don't have one that's identical laying around, but there's a good chance that i could find one on ebay. A 20gb ide hard drive probably doesn't cost that much so she's willing to give it a try for $20 bucks or so. P. S. I had already froze the hdd in the freezer to see if that would unstick it assuming that it might be stuck and that didn't help either (not sure where i picked up that trick, but it's worked twice for me over the years - this time it didn't help).

Posted On: April 10th 2008 . View Related Posts . . View 10 Replies .

Two Hard Drives Dead In One Week

Two hard drives in my computer have died in the past week. The first was a seagate barracuda 500gb and the second was a wd 160gb. The seagate i had for 2 years and i figured just died, so i moved onto my back up one. This wd is roughly 4 years old and never had any issues, so i do not know where this came about. I am going to test the wd drive for any issues, but i do not have the seagate on me, since i left for college yesterday. Any ideas on what is going on here? I don't want to get a new 1tb hdd and have it die on me. Really confused as to what is going on.

Posted On: 01-25-2010, 03:14 PM . View Related Posts . . View 5 Replies .

Revive Dead Hard Disk

My hard disk sort of died today. It's been grinding down for ever, and it eventually kicked it in this morning. It's a 10gb drive sitting in an old ibm pc300gl i use for misc stuff - sometimes for the server, or to do misc jobs like encryption cracking, or whatever. Anyway, it's not so much the drive itself which is important - i could buy a replacement one for probably under $10 - but having the data which i had stored on it is a matter of life or death. I'm too stupid to make regular backups, so there's about three months of work stored on there which i now can't get to, and which i didn't backup anywhere else - stupidly. I've tried just about everything that i know of to try and revive it - freezing it, running a hair-dryer over it, dropping it from about a foot, whacking the crap out of it with the butt of a screwdriver, and a few other weird but useful methods for resurecting drives i've picked up along the way - but it still isn't working. Any more suggestions, anyone? Basically, if i can't recover what i had stored on there, i might as well go and put some concrete boots on lay-by down at the local market. It really is that important. What happens when i try and get it to spin up is. Absolutely nothing. The little light flashes as normal, but the motors don't kick in. It sounds like they start to churn, but then sort of give up after a second or two. Sometimes, the motors will try and start - but then it sounds like the arm that supports the head-readers are just flicking back and forth very fast, making a loud whirring sort of a sound. I've been having this problem for a while whenever i've turned the beast off and then gone to turn it back on, but usually it comes to life after flicking the power switch a few times. I am in desperate need of help here. And i can't afford to send it away to a data-recovery specialist, so don't suggest that.

Posted On: 20 August 2004 . View Related Posts . . View 7 Replies .

Dead Drive

I realise there's another thread like this, but you can all look at mine now. The drive first started stuttering on my computer when i played music from it. Browsing through it would take a couple seconds every time i move to another directory. After restarting, the ahci check would pause for seconds after it reached the port the drive was in; once windows boot, it didn't even show up. Took it to another pc, the drive did manage to come up. Data still seemed intact, so i tried a scan, results showed some files just couldn't be scanned and these were normal files rather than the usual unreadables like system data. I tried opening those files, but they managed to open fine (damn mixed messages). Next day, i tried starting it again and now the computer doesn't seem to quite start up unless the drive's disconnected. It bluescreens, but the computer restarts too quickly to catch what it said. Bios doesn't see it, wd's diagnostic tool doesn't see it. Now i'm thinking of doing an rma, so i try wiping it with dban, but it finishes way too quickly, so i'm thinking it couldn't see the drive either. I'm 99% sure it's dead and wd will probably process the rma, but i'd like a 100% assurance too, so please throw in your thoughts. Also, i'm curious how possible it would be for data to be recovered. I do have backups in place, but instead i'm concerned with the possibility of important data being stolen from it.

Posted On: 10-24-2009, 02:16 PM . View Related Posts . . View 1 Replies .

1tb Dead Drive ?

The seagate barracuda 7200. 11 drive that i had bought as a boot drive (1tb) will not work. Bios won't even recognize it. Other than initial installation, it had never been touched, and was working very well. It was mounted in the cooler master stacker 810 behind a filtered 120mm fan and was subject to rather light use. However, it was at a point where around 50-100gb space was unused, the rest full. I tried removing the drive and putting in an old pata wd 250 gig drive, and was able to install vista and run the computer ok. Attempting to install the drive in question with the wd 250 caused the computer to hang at the gigabyte motherboard screen, or on other attempts, it goes to bios but still doesn't recognize the 1tb seagate. Although most of the data on it is backed up, about a month's worth is not, and it's rather important stuff. Quotes for an in-lab data recovery service have been around $400-$600 to start, or up to $3500 if it's something complicated. Any suggestions on how to handle this issue?

Posted On: 02-21-2009, 08:56 PM . View Related Posts . . View 12 Replies .

Dead Sata Drive

I shutdown my machine the other night and thinking it had completed the shutdown, i turned the mains power off but alas i was wrong. The machine was powered up later that day and it gets past post but goes no further. No error message, just a black screen. Looking in the bios, my drive is no longer listed and cannot be auto detected (but as it is a sata drive, does it appear anyway?)

When the pc is booting, it brings up the raid screen which says my drive is present, and names it together with its capacity. I tried to do an xp fix or reinstall and it tells me that no hdd is connected to my pc. I have reinstalled the tp raid driver to see if this cures it, but to no avail. Short of getting a new drive, connecting it, reinstalling windows and attempting to do a data recovery, is there anything i can do? Im not concerned about the software on the disk, but it does contain thousands of photos of my kids as babies which i do not want to lose.

Posted On: January 13th 2005 . View Related Posts . . View 3 Replies .

Revive Dead Thumb Drive

I have a 128mb sony microvault usb thumb drive. It always worked without any problems, but all of a sudden. When i plug it in to the computer the light does not turn on, and the computer does not recognize new hardware was connected. This happens in all computers. What could have caused this? And is there any way to revive the thumb drive?

Posted On: 24 August 2005 . View Related Posts . . View 20 Replies .

Revive Dead Flash Drive

My sandisk microcruzer suddenly stopped lighting up and getting recognized when plugged into any computer. No clue why it suddenly died in less than a year. Any experiences like this? Any resurrections? I'd appreciate help getting back some of the files i have on it.

Posted On: 08-23-2005 . View Related Posts . . View 6 Replies .

Flash Voyager Pen Drive Dead

I had bought a corsair flash voyager 16gb approx 10 months ago. I had a problem with it, as explained in this thread.consequently i sent it back to ocuk for rma and they sent me a new one immediately. Now. This is about the new one. I've had it for around 8 months or so now. But hey it's got a 10 year warranty!

This time i can't even check the pendrive out in any manner. As soon as i stick the drive i get a bsod - check out video of me inserting pendrive and getting bsod immediately. Either the bsod, or else my pc just stops responding with the blue circle vista cursor going on forever until i pull the pendrive out - as in other video here. What do you think?

Can i do some checking in some way, avoiding the freezing/bsod'ing, before i contact ocuk? Admit i'm feeling a bit awkward making the 2nd rma for the same object.

Posted On: 09-24-2009, 08:46 AM . View Related Posts . . View 24 Replies .

Is Usb Hard Drive Safer Than Normal Hard Drive ?

At the moment i have about 2t of data over 5hard drives, most of then films i have converted to avi from home as i live in uni halls the rooms are small, i am worried that leaving my pc on all the time will lower the life of my hard drives with data on, do you think it would be a good choice to put them into a usb drive and that way i only use them when i need? Is usb hard drive safer than normal hard drive ? Or am i just being silly?

Posted On: 10-17-2007, 12:35 PM . View Related Posts . . View 16 Replies .

Hard Drive And Enclosure For External Hard Drive

I'll be buying a western digital caviar black sata hard drive and i have a question about the enclosure. These are the enclosures i'm thinking of:

1. Nexstar 3 onyx black
2. Antec mx-100, or a
3. Rosewill rx-358-s blk (black) 3. 5" sata to usb & esata

Can anyone recommend one or the other? Or one not listed?

Posted On: 09-27-2009, 11:10 AM . View Related Posts . . View 4 Replies .

Transferring Data From Old Hard Drive To New Hard Drive

I have a dell dimension 2400, and according to the dell disk monitoring system, the drive 0 on the primary ide channel is operating outside of normal specifications, and it advises me to back up my data and get a new hard drive. I currently have a maxtor diamondmax plus 8 (6e040l0) which is the failing one. I plan on getting a hitachi deskstar p7k500 250gb ide hard drive. However i don't really know how to transfer all my data and my system files including my windows xp system files to the new hard drive. I've burnt my whole hard drive on to dvd's (about 24gb -> 6 dvd's). However i've also heard of disk imaging, although i don't really know much. If i install my new hard drive, and turn the computer on, how far will the computer boot?, Since there is no system and os files on the new hard drive. Will the opening dell page load, and will i be able to get into setup?

And if the computer won't boot far enough for me to get into the user accounts, how do i transfer my dvd data and system files to the new hard drive?

Then there's disk imaging. If i create a disk image of my entire hard drive, where do i store it, and will it be as big as all my files i.e. 24gb, and is the only way of storing it on a external hard drive?

Finally i was wondering how am i supposed to restore the files in my disk image if my computer won't boot far enough for me to actually do anything. I'm sooooo sorry that i've asked a zillion questions, but i really have to know before i make the purchase.

Posted On: June 6th 2009 . View Related Posts . . View 2 Replies .

Pc Dead

My pc does not come on when i press the on switch. Its dead. I replaced the power supply-still the same. Is it safe to say that either the motherboard of the cpu is cooked.

Posted On: March 20th, 2006, 02:12 PM . View Related Posts . . View 9 Replies .

Dead Computer

My computer doesn't come on any more. I have try changing the power supply switch, and nothing happens. Is it my mother board? I have dell dim 4600 with a 2. 66 g processorand 80gig hard drive. Can someone help me ?

Posted On: April 14th, 2006, 02:09 PM . View Related Posts . . View 14 Replies .

Dead Laptop

I have a compaq armada m700. With the battrery in it doesnt work at all, but with the battery out i get some lights, but noothing on the screen. I took it apart and all. All i had in was the mobo cpu and screen, and i got to the bios then it shut down again. Cant get theree again. It seem sthat that one time that i got the bios the cpu fan was on, and now the fan turns on but then dies after 5 sec. The hdd works, and we got all the data off of it, but i think the laptops fried. Anny suggestions?

Posted On: November 12th, 2005, 10:35 PM . View Related Posts . . View 14 Replies .

Are Two Hard Drives Better Than One Large Hard Drive ?

I got asked a weird question by someone i know, are two hard drives better than one large hard drive, i really don't know if the difference can be seen because i have 2 hard drives so. I have a 75gb raptor and a 400gb ide but i've never thought of that before, the lady who asked me said she was going to buy a new pc and does alot of work editing videos and had the choice of a pc with 2 sata hard drives or 1.

Posted On: 12-18-2007, 11:51 PM . View Related Posts . . View 13 Replies .

System Became Dead Slow

I wonder why my desktop suddenly slowed down. I used to play commandos, project igi over it for hours without any problem, but now a days it takes nearly 5 minutes to boot. I'm using windows xp
My system configuration is:

Hard disk 40 gb
Mother board celeron 733 mhz
Ram 256 mb

I'm using all tools to make my pc run faster , but it is not helping. Is there any way that i can make my pc faster so that i can play my " commandos" again.

Posted On: December 29th, 2005, 06:00 AM . View Related Posts . . View 6 Replies .

Computer Dead No Power

I left a 3-year-old compaq desktop computer at my summer camp last fall. Apparently, the cold temperatures got to it. When i returned recently, it was completely dead. No pilot light, hdd spinup or fans. Checked power at outlet, replaced power cord and verified switch continuity. All ok. I remember from years past that power supplies typically contain a "power good" circuit that totally shuts down the supply if any voltage is out-of-spec. Assumed stiff lube in a hdd might be stalling the motor and overloading the power supply. Disconnected power from all drives, removed pci cards and disconnected all usb cables. Still dead. I borrowed and installed 2 used power supplies both of which are believed (but not known for sure) to be good. Neither produced any change. Thus i am assuming that the motherboard is bad and overloading the power supply. Before jumping to that conclusion (and probably junking the computer) i would like to verify the power supply is ok. Donít have another computer to try it in. Does anyone know pinouts on power supply connectors? Iím assuming a small load (say a 1k resistor on each supply) and shorting the power switch leads should make a good supply operate. Is that correct?

Posted On: 12-Jun-2007 . View Related Posts . . View 4 Replies .

No Power Computer Dead

I just built a system over the weekend, and everything was working fine. Once everything was installed, i decided to move it upstairs, so powered down as usual. No indications of any problem - normal shutdown of xp. I took the unit upstairs, hooked up all the cables, plugged it in, pushed the front power switch. And nothing: no fans, no lights, no nothing.completely dead. I tried several power cables and outlets - nothing. Took it back to its original location - nothing. So i swapped out the psu with a similar unit, same response. Pulled the power switch connector off the mobo and reconnected. Removed everything but essential parts. Still absolutely no response. There is absolutely no smell from the psu.could it be the power switch? How can i work around it? Any way to jumper the pins on the mobo so that it thinks the switch is on? I'm absolutely baffled here - it went from perfect functioning to nothing with no indications of any problem whatsoever!

Posted On: 09-01-2008 . View Related Posts . . View 8 Replies .

Video Card Dead

Well, i just received a new computer which was put together by a friend. He had it oced to perfection. So i received it and he had the gpu laying out, so i put it back in the pci-slot, plugged in my monitor, and the screen just was black. So, he told me since it came out, i would have to reset the bios. So i took out the battery waited 30seconds, turned off computer, put gpu and battery back in, then i turned it out, the screen went weird colors, then seemed fine, so i turned it off to put in the rest of my things, like keyboard, then i turned on again and it didn't show. Now, i took the gpu out of mobo to see if it would run( the fan) , and it didn't, so i put it back in, and the fan starts, and everything else is running properly, i cn't get any picture though?. I'm brining it in to a store tomorrow, but if they gpu was dead, would the fan still start?, Because when i put it in the motherboard the fan spins and sounds like it is all going good , but it just dont show anything on the screen?

Posted On: October 11th 2006 . View Related Posts . . View 14 Replies .

Cooked Cpu, Now Dead Mobo

I had it all together and i could read the bios. Everything looked good so i started installing xp when i had a disaster. As the hdd was formatting (and taking ages) i left the room and a power cable unraveled, touched the cpu fan stopping it and the processor got cooked. $200 down the drain! Gutted

So after recovering, i bought another q6600 and have just reinstalled it. I took out the mobo to reinstall the new one but am sure i've put it back in the same way. Now when i boot i get a long beep, the leds on the ram are flashing, i here the fdd chatter, the dvd blinks but no output is going to the monitor (monitor displays 'no input signal'). What do you think the long beep would suggest? After cooking the cpu is it likely that something else was damaged? I can't keep throwing money at this so would appreciate any expert advice on how to proceed without simply replacing everything. After listening again the long beep may be a long then a short. New mobo time?

Posted On: August 4th, 2008, 02:56 PM . View Related Posts . . View 7 Replies .

Software For Dead Floppy Disks

Can you recommend software to "magically" repair dead floppy disks? Periodically company employees bring to me dead disks. In most cases as soon as i try to access the disk windows asks to format it. Is there a way to revive these disks?

Posted On: December 12th, 2006, 11:29 AM . View Related Posts . . View 5 Replies .

Wireless Router Signal Is Dead

I just set up my wireless router and 2 of the 3 computers in my house are with working internet. The computer which has the router connected to it is a desktop running windows vista. The computer i am on is a laptop running windows 7. And the laptop which is not working is a lenovo netbook the second the wireless connection was establish i had signal. And now the signal is dead input the password to the router with the signal being broadcast to my laptop with a stable signal from the desktop. The signal going to the netbook ends with limited connectivity. I tried to disable the firewall to see if the signal was being block and that did not work. I have repeatedly tried to coax the router and attempt to reset it and nothing works. Im not sure how to establish the connection to the one laptop. Do i need to reset my router regardless of the fact i have the working connection? What do i need to do to fix it?

Posted On: 2 months ago . View Related Posts . . View 1 Replies .