Advertisements:




Samsung Syncmaster 2032bw Flicker


I bought a samsung syncmaster 2032bw a couple of weeks ago from ebuyer to run as a second monitor with my samsung r70 laptop (vista). It is connected by vga and runs at 1680x1050 (32bit). The problem is that the screen has an intermittent flickering, which is most apparent on dark backgrounds. I used to previously be able to run the monitor at an optimized 75hz refresh rate, which did make a slight difference (although the flicker was still obvious now and then), but since an nvidia driver update a few days ago i am only left with the option of 60hz in the advanced display settings or the nvidia control panel. I have been noticing increased eye strain and headaches from this. The current driver version is: 7. 15. 11. 8084

Since the update, my display settings are always reset when ever i restart my machine, which is becoming tedious. My graphics card is an nvidia geforce 8400m gs with an approximate total memory of 1395mb. Dxdiag notes (for both displays) that:

The file nvd3dum.dll, nvwgf2um.dll is not digitally signed, which means that it has not been tested by microsoft's windows hardware quality labs (whql). You may be able to get a whql logo'd driver from the hardware manufacturer. - How can i force a 75hz refresh rate?
- Could the flickering be down to a faulty vga cable or power cable?
- Could the monitor itself be faulty and require returning?
- Should i roll back the driver to see if this can help with the refresh rate issue?


View Full Post With 3 Replies

Related Forum Messages:

Please Follow Index to Quick Jump to the Message.


Samsung Syncmaster Screen Black

I have a samsung syncmaster 931bw and yesterday the screen just went black. If i turn the monitor off and then on again it will display my desktop for about 3 seconds and then it goes black again! I can't figure out whats wrong with it because it has to be the monitor and not the computer, i've hooked it up to my laptop and same thing, turn it off and then on and i have 3 seconds of working and then black again.

Posted On: May 18th 2009 . View Related Posts . . View 1 Replies .

Samsung Syncmaster 940bw Configuration

I just got a new monitor at my office. It's a syncmaster 940bw from samsung. It is 19" and the native configuration is 1440 x 900. When i use this configuration, everything is fine but i feel that things are quite small. So i tried another configuration but the other configurations that are offered when i go to the configuration panel on windows are the following :

1280 x 768
1280 x 720
1280 x 600
1152 x 864
1024 x 768
800 x 600

I tried the 1280 x 768 but i would really need is 1280 x 800. The 1280 x 768 configuration stretches everything. Is there anything i can do to be able to us 1280 x 800 ?


Posted On: February 6th 2007 . View Related Posts . . View 3 Replies .

Samsung Syncmaster 206bw Problem

I own a samsung monitor the syncmaster 206bw and here is the problem. I connected the monitor to my pc with a albatron geforce 5700 leq (256mb) at dvi port. After few hours i realized that every time i turn on the pc, the monitor doesn't shows anything, only black screen. After 20 secs suddenly appears the welcome screen at winxp and everything is ok. After that i decided to check the monitor with another vga and connected it to the ati radeon 9550. Well, with this card everything is ok and no problem occurs.

Posted On: November 10th 2007 . View Related Posts . . View 1 Replies .

Samsung Syncmaster 170mp Monitor Problem

I have a samsung syncmaster 170mp monitor and starting last week the pc screen is darker then it use to be. I have played with my brightness and contrast on both my vid card and on my monitor but it still is worst then it was. Since it is also a tv i have my gamecube hook up to it and when i play smash bros the picture is still as bright has it use to bright on pc. Does anyone have any ideas on what the problem is and how to fix it? As usual samsung's tech support was no help to me. Ps i have tested another monitor on my computer, works perfect, and have tried my monitor on another computer same problem.

Posted On: June 21st 2006 . View Related Posts . . View 2 Replies .

Samsung Syncmaster B2330 Wont Turn On

My brand new samsung syncmaster b2330 will not turn on. I believe i have the correct driver installed, the cables have worked on other equipment, and it has a power source. It seems like it might have power, but it won't turn on. Is there some hidden button or is my monitor just defective.

Posted On: 1 month ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 971p Wont Turn On

I have the samsung syncmaster 971p and it wont turn on. The tower is working. What should i do?

Answer:-

First, check and reseat both ends of your video & power cable and make sure they are seated properly & fully. If that doesn't work, check your power indicator light and see what color, if any, it is. It should be green if the monitor is on. If it is green and you see no display, your monitor is probably bad. The backlight of inverter is bad and would need to be replaced. Otherwise, you can purchase a replacement. If the light is amber, then it's not getting a signal from the video card. Check and reseat the video card. Try booting into safe mode to see if you get a picture. If that doesn't work, then you may need a new video card. If safe mode works, then check your display settings in windows and change as needed. If there is no light when you push the power button, then the monitor is not getting power. Check your power cord and where it's plugged in at to make sure the power is good. If all that checks out, you will need to repair or replace the monitor.


Posted On: 5 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster Flashing Blue Light

My new samsung syncmaster 2333hd has a flashing blue light when i turn it off which is very annoying, as this tv is in my bedroom i have to cover it up! Please advise, i cannot find a samsung email address for product support.

Posted On: 6 months ago . View Related Posts . . View 2 Replies .

Samsung Syncmaster 713bm Monitor Problem

I have a samsung syncmaster 713bm monitor. When i plug it into m p. C tower it works fine (resolution 1080x1024) but when i plug it into my laptop as an extended screen it says it is not running in optimum mode, recommended mode 1080x1024 60hz. The screen when plugged in my laptop is set up to display 1080x1024 60hz. What should i do?

Posted On: 6 months ago . View Related Posts . . View 3 Replies .

Samsung Syncmaster 943n Monitor Adjustment

I can't at all, customize the width and length adjustment on samsung syncmaster 943n monitor! Now it's all messed up when i play video games!

Posted On: 7 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster Px2370 Monitor Fuzzy

Why my brand new led monitor made by samsung is being so fuzzy? It is a "syncmaster px2370" made by samsung and the model i saw at the store looked amazing but now that i have it hooked up everything that is small in detail like text or icons looks really fuzzy and awkward. I think it has something to do with the settings, what can i do?

Posted On: 5 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 205bw Screen Black

I use an external samsung lcd screen (syncmaster 205bw) for my laptop. My laptop went to standby when i was away. And when i came back, my lcd was black. My laptop still works normal. When i turn the lcd on, i could see the switch light goes blue, but the screen remains black no matter how many times i connected it with my laptop. Any suggestions?

Posted On: March 14th 2008 . View Related Posts . . View 1 Replies .

Samsung Syncmaster 793s Monitor Driver

I have a samsung syncmaster 793s (white) 17 inc. Monitor i lost my driver cd anyone give me driver or link?

Posted On: 7 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 763mb Crt Monitor Problem

I have a samsung syncmaster 763mb crt monitor using about more than 4 years , now i have a problem in pressing the push button to make the monitor on/off. For the past 2 days, when i press the push button of the monitor turn on, it doesn't turning on, so i need to press it again for 4 or 5 times , it will turn the monitor on. Or
Sometimes when i kicking the push button with my finger somehow, it will turn on the monitor and also at sometimes goes off[blinking] and then comes on if i clicking with my fingers. Now the condition is, it doesn't turning the push button to be monitor off, always on[blinking, after shutting down the operating system]. I had no problems in operating systems or flickering in monitor or sound. Just this push button of the monitor on/off is not co-operating. Please tell me what happened to this monitor push button[ got loosed to turn the switch on/off ?!] And then, is there another problems of the monitor in future, and also tell me how to resolve this problem ?!


Posted On: September 3rd 2008 . View Related Posts . . View 1 Replies .

Samsung Syncmaster 932b Wont Work With Ps3

I am having a problem, my ps3 wont work with my lcd samsung syncmaster 932b. Syncmaster 932b with no hdcp, how i can connect ps3 without hdfury.

Posted On: 1 month ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 2033sw Monitor Resolution Problem

How do i get my laptop display to offer the optimum 1600 x 900 resolution for my samsung wide screen monitor? I have a compaq presario c700 laptop with an extra monitor - the samsung syncmaster 2033sw (a 20'' widescreen monitor), running windows vista. The optimum resolution for this monitor is 1600 x 900, but neither the regular display settings nor the intel(r) graphics media accelerator driver will offer me this combination. The closest options i get are 1280 x 960 or 1600 x 1200, and both of these look terrible. I have installed samsung's driver, and tried restarting a few times, and nothing has worked. Any suggestions?

Posted On: 2 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 2494sw Monitor Audio Not Working

How do i get audio working on my samsung 2494sw syncmaster monitor? I just bought a samsung 2494sw and i hooked it up to my cpu and i then hooked up my ps3. I'm getting sound when i'm on the computer but when is switch over to ps3 i'm getting no sound at all. Can someone help me out here? I''m using a dvi to hdmi cable.

Posted On: 3 months ago . View Related Posts . . View 1 Replies .

Samsung Syncmaster 215tw Vs Dell Ultrasharp 2007wfp Monitor

I am having a hard time choosing! Somebody help. I don't do gaming just view the web and photoshop stuff. Samsung's syncmaster 215tw vs dell ultrasharp 2007wfp 20. 1.

Posted On: December 8th 2006 . View Related Posts . . View 2 Replies .

Samsung Syncmaster 933 Lcd Monitor Hd 1080p Videos

Can i play full hd(1080p) videos on my samsung syncmaster 933. It supports upto 1360*768 resolution. If i play the hd video can my monitor got affected ? Please tell me what happned when i opened this video? Can any software that play hd videos on my monitor without affecting it?

Posted On: 6 months ago . View Related Posts . . View 3 Replies .

Magic Color Demo Off From Samsung Syncmaster 730b Monitor

How do i get rid of magiccolor demo/magiccor on magiccolor off from my samsung syncmaster 730b monitor?

Answer:- i had the same problem with my samsung syncmaster 205bw. I got this solution from a 2nd tier technician at samsung. Hope it works with your model. Before sending my monitor out for repair, i wanted to try to reset it to the factory default settings. But i couldn't access the on-screen display (osd) menu because it was stuck on the magiccolor demo. I knew there had to be another way to do it. And i finally talked to a samsung technician who told me how. 1. I put my monitor into analog mode. (I had my monitor disconnected from my computer when i did this. ) The "return" button on the front of the monitor switches between digital and analog modes. 2. Holding the same "return" button down for 15 seconds reset the monitor to default settings and allowed me to access the osd menu (using the menu button, also on the front of the monitor). I put everything back the way i wanted it and the crisis was over. Hope this works for you.


Posted On: 3 months ago . View Related Posts . . View 1 Replies .

Screen Flicker

I just got a brand new asus m6b00n laptop with 15. 4" wxga screen. When plugged in to ac power, there is an intermittent flicker on the screen. It happens infrequently, and it is very slight. I worry that there may be a problem with the inverter or backlight. But i wonder if it may simply be related to the quality of ac power. (I am not running it through a ups or line conditioner. )

Is it possible for a laptop display to be sensitive to the ac power source, causing the screen to flicker? Or is there a good chance that i simply have a defective laptop? I am hesitant to send it back because the problem is so intermittent, they may never see it.


Posted On: 05-07-2004 . View Related Posts . . View 9 Replies .

Bad Screen Flicker

I'm getting some bad screen flicker while gaming only. I am using the latest ati drivers and the problem goes away when i disable catalst ai in the ccc panel. Its wierd because it was'nt doing this yesterday. My card is'nt oc'ed.

Posted On: 12-05-2009, 11:41 PM . View Related Posts . . View 8 Replies .

Radeon 5770 Displayport Flicker

I bought a displayport monitor (dell p2210h) for a future eyefinity setup and i hooked up a displayport cable i got from monoprice to test it out. It works great in 2d mode, but whenever i try to run any games, the screen flickers like crazy constantly switching between full screen to like an 80% screen like a strobe light. I am running the latest 10. 2 catalyst drivers. I am at wit's end with this so if anyone can help, that would be greatly appreciated. It works fine in dvi, but i would rather solve this now than have it frustrate me later. Also, when i run 3d apps in a window it runs fine, but no matter what resolution, in full screen it will flicker.

Posted On: 02-22-2010, 02:11 AM . View Related Posts . . View 10 Replies .

S-video To Tv - Screen Flicker And Remains Black

I have a compaq presario v3000 laptop with intel 945 chipset. My tv is a simple color tv (lg, pal color encoding, i am in india). When i connect my laptop's s-video o/p to tv and boot my machine all i see is a flicker and tv screen remains black. I tried presse fn+f4 key combination but i just see a flicker on tv and nothing else. Am i doing some thing wrong?

Posted On: March 17th, 2009, 04:50 AM . View Related Posts . . View 14 Replies .

5850 Dual Monitor Flicker Issue / Fix

Was pulling my hair out today after receiving my sapphire 5850 in the mail. At stock with a clean install i was getting the annoying flicker issue. I run 2 hp lp2475w monitors, and it's i now see well known with this flicker issue. I figured i would just attach the bios i edited to make this all go away. And anyone can just edit my unlocked asus bios in rbe themselves if they want to over/under-clock the card and immediately get rid of the flicker issue without messing around with ccc profiles or msi afterburner. So it's basically in 2d mode 400/1200 at 1. 0875 volts and in 3d it's set at 850/1200 at 1. 0875 volts. I think the key to the flicker is the voltage in the x18 register in the gpu voltage editor. Please ask any questions. But if you know how to use rbe this is pretty simple to figure out what settings i used. I am linking to my blog so i can keep track of how many people are downloading this. http://civildevelopmentgroup.com/blog/2010/03/10/ati-5850-bios-dual-monitor-fix/

Posted On: 03-10-2010, 03:50 AM . View Related Posts . . View 3 Replies .

Screen Flicker / Strobe When Try To Play Games In Sli

I recently got a second gtx280 gpu. I now run it in sli with my other card. Thing is when i go to play battlefield 2142 i get a flickering or strobing of color. When i disable sli it goes away. I also had this problem with battlefield bad company 2 beta. I am wondering if anyone knows why this is. Is it perhaps that one card is an evga ssc and the other is a stock leadtech? I have the current driver. Not the one that nvidia messed up but the one right before it.

Posted On: 03-10-2010, 08:30 PM . View Related Posts . . View 1 Replies .

Hd 4850 - Dual Monitor Flicker Issue - Fix

If you are running a hd 4850 & dual monitors off that card, you may have been getting a flicker, bsod, or drive crash. This is being caused by the power save mode on the card. Specifically, the memory portion of the power save. This will stop the flicker / bsod/ & driver crashes when using a second monitor. You can keep the cores at the lower speed for the power save features if desired. See the forums replies for instructions on how to fix.

Posted On: 08-17-2008, 07:13 PM . View Related Posts . . View 14 Replies .

5970 + Dual Monitor Flicker / Jitter Problem

I purchased a sapphire ati 5970 card to power two dell 3007wfp monitors. I often use one for gaming (at 2560x1600) and the other for movies (720p or 1080p). My problem came when running anything on both monitors. One monitor would produce a "flicker" or "jitter" that made it unwatchable. To be specific, the "jitter" is a roughly 1/2" horizontal band across just one of the monitors that persists when doing anything that more or less changes the screen. Fwiw, i've tried;

1) swapping dvi-d cables (i used 2 new ones on each monitor)
2) swapping which dvi-d cables go to which ports on the back of the card
3) using a dvi-d and a displayport cable
4) both windows 7 and windows vista

Based on this, i don't think it's a bad port on the card. I've also disconnected the second monitor and the first monitor that was previously showing the "jitter" stopped. So, it's definitely caused when two monitors are active.googling this comes up with reports of people pointing to ati overdrive and turning it off to solve the problem. That leaves fan/cooling issues that don't seem good. I'd prefer not go this route and find a approved solution. Finally, i noticed the horizontal band that one of the monitors shows in the dual monitor setup is consistant. That is, it is always at the same height and just flickers like a band of static. It seemed to change it's position (vertically) depending on what inputs i used (dual dvi-d's vs. Dvi-d + displayport). This seems an edge case for ati/amd (one hopefully fixed by drivers!), And something i'd be interested to hear if others have experienced. As it is, i'm about to rma this card and maybe go for a 295 + 280 setup, but i'm still hopeful i can solve the flicker problem and call it a day.


Posted On: 12/07/2009 . View Related Posts . . View 28 Replies .

Power Issue On Shutdown, Fans Do Not Stop, Led Flicker

Just put together a new machine, but using an old antec case and 350w psu (antec sl350s) and some other old hardware. First i started just plugging in the mobo with ram and heatsink (so, no peripherals connected, not even hd or the video card) and i notice that when i power down by holding down the front power button, the cpu fan stops, but the case and psu fans keep going! I have to switch off using the psu switch to shut everything down. Well, that's weird, but i still move on. However, with all the new hardware plugged in, the problem gets worse. Now when i switch off using the front power button:the case and psu fan are still onthe power led is off, but the hd led starts flickering very rapidlythe floppy drive starts grinding loudly and angrily; leave the system in this state, and the grinding dies down (but never goes away), then comes back after a few minutes, although i haven't done anything (the box is just sitting there)

The real problem is, the system does not boot after that! If i turn off the psu switch, then turn it back on, the clicking/flickering comes back. Pushing the front power button makes the cpu fan jerk, but it does not start on and the system does not start booting. But if i wait a few minutes with the psu switched off, i can boot up after that. This need to wait for a while is bothering me. What could be going wrong? Are these symptoms of a faulty power supply? How should i proceed diagnosing this?

So to conclude, my system goes into this weird twisted state where hd led flickers and floppy clicks at about the same rate and the power/reset button do nothing. The state is reachable if i power down using the front power button, or if i flip the psu switch off and back on after that (but if i wait for a few minutes before switching it back on, then fans do not come back on and i can boot just fine). My system (items marked "new" are the stuff i just bought, the rest is components that have been working for at least a few months):

Cpu: amd athlon 64 x2 5000+ 2. 60ghz dual-core (new)
Cpu heatsink/fan: noctua nh-c12p cpu cooler (new)
Motherboard: asus m2n-sli (new)
Ram: 2 x 1024mb ocz platinum revision-2 pc6400 ddr2 800mhz dual channel (new)
Video card: evga geforce 6200 256mb ddr2 pci video card (only bought it because mobo doesn't have on-board video, dang) (new)
Psu: 350w antec sl350s
Hard drive: 160gb sata 3. 0gb/s samsung spinpoint
Other peripherals: promise 2-port sata 3. 0gb/s raid controller card
Case: antec slk3700-bqe
Case fan: some 120mm antec fan that came with the case


Posted On: September 4th 2008 . View Related Posts . . View 7 Replies .

Which Is Better Lg Monitors Or Samsung ?

Which one is better between lg monitors and samsung monitors? Overall which one do you guys prefer and why?

Posted On: 5 months ago . View Related Posts . . View 1 Replies .